2.2 Other Specification
● Paper Loading Method: drop-in easy loading ( please refer to details in 3.1.2 Paper Roll
Installation).
● Black Mark Location: available(details please see 4.2
pre-printing black mark manual).
● Paper End Detection: when paper is out, the ERROR
Indicator will constant on lighting, The buzzer rings when it is printing, and
it will stop printing.
● Printing Control Command: ESC/POS compatible command set
(refer to<T9 Printer Developer Manual >).
● Power Supply: 7.4VDC/1500mAh rechargeable polymer lithium battery.
● Power Alarm: when the battery is low, the battery indicator blinks
● Battery Charging: quick charging ,it will be charged full about 3 hours;
● Battery Duration: under25% printing density ,at least 120 meters, the standby time is over
100 hours.
These parameters are just for reference, long term usage will cause the capacity decline, and
can not ensure the time of printing.
Chapter 3
Operation Method
3.1
Using Preparation
3.1.1
Battery Installation
1. Put the battery into the battery slot.
2. Install the battery cover.
