This function may set some simple printing parameters.
该功能是设置打印的一些简单参数
Entering parameter setting: Switch off, then hold down the
【
FEED
】
button and press the
【
POWER
】
button at the same time. Then loosen the
【
POWER
】
button and
【
MODE
】
button
when you hear ‘one low one high ’prompt tone. The printer turns into the parameters setting
mode.
Print out the first item which can be set parameters and the current numerical value. Please see
details in the appendix as below.
Quitting parameter setting: Hold down
【
MODE
】
and
【
FEED
】
buttons, then loosen
【
MODE
】
button and
【
FEED
】
button. Saving the set parameter and exiting the parameter setting mode.
The setting parameters won’t be saved if you directly press the
【
POWER
】
button to turn off
the printer.
3.2.7 Battery Charging
The battery will run out after a period of usage. When it nearly runs out, printer will give a
alarm through the battery indicator flashing, at this time, user needs to charge up the battery
The charging method is as following: connecting the adapter to the power socket with 220V,
50HZ, then plug the power charging plug to the power socket of the printer, so the power
charging begins. During the course of power charging, the charging indicator
【
CHARGE
】
goes red, and
【
CHARGE
】
turns to blue when the charging is full. It takes about 3 hours to
charge up the battery. Using the printer during the course of charging power will make the
charging time go longer. It shows the failure if the charging indicator
【
CHARGE
】
goes blue and
red during the course of charging. Such as faulty installation of battery, faulty contact of battery
or internal temperature of battery is too high or too low.
3.3 Printer Parameters Setting
Users can set more parameters by using the specified
〈
T9 Setting Tools
〉
software through
computer. The setting includes: language
、
font
、
printing density
、
default code page
、
bluetooth
device name and password (only T9-BT) etc. The setting method please refer to the <T9Setting
Tools Software Help>, offered with the software together.
3.4 Printer Interface Connection and Printing
3.4.1 USB Connection
The T9 printer of standard accessories includes Mini USB cable which connects printer. The
USB type belongs to the slave device type.
3.4.2 Bluetooth Connection
Handheld device, laptop and other information terminal devices with Bluetooth can drive T9
