Mobiset GmbH - Rösrather Straße 333 - 51107 Cologne - Germany
Tél. : +49 221989520 - Fax : +49 2219895222
GB
Press the play/pause key to accept an incoming call.
Press and hold the play/pause key to redial the last
number dialed from the mobile phone.
Usage of the hands-free
Before using Bluetooth speakers, please pair the speaker with your
smartphone, MP3, computer or any built in bluetooth device.
Steps:
Turn the speaker power ON. Upon power ON the speaker will automatically be
in pairing mode. Blue indicator lights appear in slow flashing indicates „ in
pairing mode“ Ensure that the BT speaker is not paired or connected to any
other device.
Paring process to note:
When device detected Speaker/sound2goBB, initiate and paired them. Should
device request for password, enter default password „0000“, press OK button
to complete the pairing. NOTE: If pairing fails, please refer to
„Troubleshooting.“
Turn on NFC on your mobile phone and hold it against the bottom of the
BigBass. Confirm the pairing wish on the mobile phone, after that pairing and
connecting will happen automatically.
Long press the Play/Pause button to disconnect the current connection from
Bluteooth to 3.5mm jack input device. Vice versus to return back to bluetooth
connection mode. Alternatively, u may just plug in the 3.5mm jack while BT is
connected. The 3.5mm jack input device will overide the BT function
automativally and vice versus.
NOTE: The duration of pairing mode time is approximately 30 seconds, hence
the pairing should complete within the specified time. Should it fails to pair
within the time, the device will be back to normal mode. Reset the bluetooth
speaker via ON/OFF power button and proceed with pairing again.
Insert the card with the golden contact points facing downwards and start the
music with the play/pause key. You can control the playback with the keys at
the BigBass
Pairing with NFC
Play Music with Micro-SD Card
universe
