background image

 

PRODUCT WARRANTY 

 

In normal use, if a part or parts of the electric bicycle have any problems listed in the following form 
during the warranty period, please contact your local vendor or authorised reseller, we will provide a 
complete service as specified in the warranty book. 

Item 

Quality problems 

Warranty 
period 

Service item 

Motor 

Under normal circumstances the motor cannot be 
used 

One year 

Free 
maintenance 

Controller 

Failures under normal use 

One year 

Free 
maintenance 

Lithium Battery 

Under normal circumstances cannot be charged 
and discharged 

One year 

Free 
maintenance 

Body structure 

Failures under normal use, such as deformations 
and fractures 

One year 

Free 
maintenance 

Charger 

Failures under normal use 

Six month 

Free 
maintenance 

UBHI 

(uniblock human 
interface-display) 

Cannot be used under natural conditions  
(Excluding the impact forces and external 
damages) 

Six month 

Free 
maintenance 

Note: Please follow the correct way to use this product, the company will not be responsible for parts 
damaged and other damages caused by misusing. 

PRODUCT WARRANTY

 

In warranty period, if the malfunction and damage caused by the following reasons, it will not be within 
the scope of product warranty: 

1.  Inappropriate maintenance and repair that are not in accordance with the instruction manual. 

2.  Use of the electric bicycle for other purposes such as performing dangerous acts which result 

in damages or functional failures. 

3.  Using any of  the external factory components. 

4.  Disassembling the bicycle without contacting the local reseller. 

5.  Wrongly usage causing traffic accidents or accidental collision damage to the product body and 

the parts. 

6.  Product wear and tear. 

MOBOT PTE LTD 

62 Ubi Road 1, #03-19 Oxley Bizhub 2, Singapore 408734 

Tel: 65382816 | Fax: 65382817 

www.MOBOT.sg

 

16 

 

Summary of Contents for Mars & Venus

















Reviews: