19
/40
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
2.2
Housing And connectors
The Mx2wire media converter is a set of two Mx2wire units, each consisting of a circuit
board and housing, front panel, frames, fl ush-mounted or surface-mounted socket and
assembly parts.
connectors
• Front: RJ45 network (Ethernet network including PoE power supply)
• Rear: Two-wire (connectors 1 and 2) and MxBus (connectors 3 and 4, not yet available)
Only connectors 1 and 2 may be used for the two-wire connection. Connectors 3 and 4
are reserved for the MxBus connection, which will be available in the future
The terminals of
Mx2wire are designed
for wire cross-sections
of between 0.13 mm
2
and
2.0 mm
2
(solid wire)
No multi-core cables
allowed (unless equipped
with wire-end sleeves)
LED functions—see
Sections 3.2 and 3.3
LED 1 green (power)
LED 2 orange (data)
RJ45 network
connection
Mx2wire
two-wire connection
