36
/40
Mx2wire User Manual:
cOnTEnTS OPErATIOn
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
3.3 Troubleshooting & Tips
Examples Of Operating Status
LEd 1 – Sender LEd 2 – Sender
LEd 1 – receiver
LEd 2 – receiver
1
BLINK
ON
ON
ON
2
ON
ON
ON
ON
3
BLINK
BLINK
ON
BLINK
4
ON
BLINK
ON
BLINK
1. Mx2wire and the end device (camera) both receive suffi cient power from the PoE switch
(green LEDs). A data connection from the end device to the PoE switch is established
(orange LEDs), however, no data is currently being transferred. The blinking of the
green LED (only) on the sender indicates that another PoE end device (camera) is
being supplied with power in addition to Mx2wire.
2. Both Mx2wire units receive suffi cient power from the PoE switch (green LEDs). A
data connection from the end device (PC) to the PoE switch is established (orange
LEDs), however, no data is currently being transferred.
3. The blinking of the orange LEDs on both units indicates that data is being
transferred from the camera to the switch via Mx2wire.
4. When the green LED on the sender lights up rather than blinks, this indicates that
no PoE-supplied end device is in operation here.
Two-wire cable
Sender
Receiver
LEd 1
LEd 1
LEd 2
LEd 2
PoE switch/injector
IEEE 802.3af
End device (camera/Pc)
