9
/40
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
comparative Tables For The Transfer rates Of data And Power depending On cable
Length And cable Type
Antenna or Coaxial Cable
Thickness
Length of coaxial cable
50 m
100 m
500 m
0.6 mm
inner conductor
Data: 30 Mbps
PoE Class: 2
Data: 25 Mbps
PoE Class: 1
Data: 15 Mbps
PoE Class: N/A
Telephone Line and Bell Wire
Thickness
Length of Telephone Line/Bell Wire
50 m
100 m
200 m
0.6 mm
Data: 25 Mbps
PoE Class: 2
Data: 20 Mbps
PoE Class: 1
Data: 10 Mbps
PoE Class: N/A
0.8 mm
Data: 30 Mbps
PoE Class: 2
Data: 25 Mbps
PoE Class: 2
Data: 15 Mbps
PoE Class: 1
Installation Cable
Thickness
Length of Installation cable
50 m
100 m
200 m
1.5 mm
2
Data: 20 Mbps
PoE Class: 2
Data: 15 Mbps
PoE Class: 2
Data: 10 Mbps
PoE Class: 2
Network Installation Cable
Type
Length of network Installation (use of All 4 Wire Pairs, See Below)
200 m
300 m
500 m
Cat7
Data: 30 Mbps
PoE Class: 2
Data: 20 Mbps
PoE Class: 2
Data: 10 Mbps
PoE Class: 2
Mx2wire can also be used to extend the range of an Ethernet connection that would
otherwise be limited to just 100 m in length (between the PoE switch and end device).
For
this purpose, a cat7 installation cable is converted to a two-wire cable as follows: Open
the four twisted wire pairs and remove approx. 7 mm of insulation from the ends. Then
connect the four white wires together to one cable and the four colored wires together
to another cable and attach wire-end sleeves
. In conjunction with Mx2wire, PoE class
2 power can be transmitted over a distance of 500 m at a data rate of approx. 10 Mbps.
Details on the
listed cable types is
provided on page 7
Please also read the
explanations and the
note on page 10
Use 2 wire-end sleeves
to connect to the two
Mx2wire connectors
Open the 4 twisted
wire pairs
Remove isolation from
the ends of all 8 wires
Combine 4x white and
4x colored
