Page 8
MOCET IP3093-L Communicator mini Quick Start Guide
Function Description for Interface of Communicator mini:
No
Part Name
Description
1
Speaker
For playing audio, ring and hands-free operation.
2
Lightning connector
For Mobile device charging when it is seated on the
Lightning connector. Data synchronisation is supported
between your Mobile device and a computer connected at
the micro-USB port. (cable not supplied)
[Note]:
If you need a connector for another type of device,
please contact MOCET directly.
3
Volume indicator
light bar
For current volume indication.
Press volume up button twice will turn on one more light.
Press volume down button twice will turn off one more light.
Volume control
Volume up (
) : Touch to raise the volume.
Volume down (
–
) : Touch to lower the volume.
Bluetooth
Touch and hold for 3 seconds to enter the pairing mode.
Slow blinking
: Bluetooth is on pairing mode.
Steady on
: Once the Bluetooth communication is
established, the LED will be steadily lit and a hint sound will
be heard.
AUX-in
Toggle this to switch audio path of the Mobile device either
AUX-in or Bluetooth.
Steady on
: Audio from Mobile device is through the
included AUX-in cable instead of Bluetooth.
Mute
Single touch to control Mute/Unmute of microphone(s). Or,
double touch to Mute/Unmute both Mic(s) and speaker(s).
Steady on
: Both microphone and speaker are all muted.
Slow blinking
: Microphone is muted only.
[Note]:
When mute is on, the external IP-MIC pair will also be muted.
You can mute the audio in the iPad mini or iPhone app or the built-in
phone app of the iPhone.
4
Speaker
Touch to enable Communicator mini’s hands-free mode.
Steady on
: Hands-free mode is enabled. (Default)
5
Microphone
For hands-free mode.
6
AUX-in port
Connect to the headset port of your mobile device through
the AUX-in cable. This is useful in the event that an iPad
mini or iPhone app does not support Bluetooth audio.
