3
4
ADJUSTING THE HEIGHT: The chair can be set at 5 different heights.
To lower the seat, pull the two levers downwards (fig.a) and move it to
the required position. Holding the handle behind the backrest (fig.b)
can also be used to raise the seat.
WARNlNG: Fall Hazard: This can’t be done with the child in the
high chair. Don't use when the horizontal height of the high chair
is inconsistent.
RECLINING BACKREST: The seat can be reclined in 5 positions.To
adjust it, raise the handle behind the backrest (fig.c) and lock it in the
required position.
WARNING: Fall Hazard: Be sure to check that the backrest is fully
locked after adjustment.
ADJUSTABLE FOOTREST: The footrest can be set in 3 positions.To
raise it, push the footrest upwards (fig. a). To lower it, press the two side
buttons at the same time (fig. b) and select one of the three available
heights.
A
A
B
B
C
Rayne Highchair
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
