background image

12

Specifications

Legal notices

FCC Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS 
standard(s). Operation is subject to the following two conditions: (1) this device may not cause 
harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning

: Changes or modifications not expressly approved by the party responsible for 

compliance could void the user's authority to operate the equipment.

Interference Notice 

Bluetooth products are a radio device that might cause interference with other non-Bluetooth 
devices (for instance, devices using wireless LAN). 802.11b technology might cause 
degradation on the performance of Bluetooth devices. 

Dimensions (LxWxH)

3.7 x 3.7 x 2.9 in.
(94.21 x 94.21 x 73 mm)

Frequency

100Hz - 20KHz
3W of power with 1% THD

Weight

7.65 oz. (217 g)

Bluetooth range

33 ft. (10 m)

Supported Bluetooth profiles

A2DP, HFP

Battery Life

5 hours

MD-SPBT01_13-0842_MAN_V1_ENG.fm  Page 12  Friday, November 22, 2013  10:09 AM

Summary of Contents for MD-SPBT01

















Reviews: