background image

5.3 Sync Out

If you use the Sync Out mode, the internal tempo of x0xb0x is used.
To enter the tempo you can use the tempo knob or the tap tempo function.
The Tempo LED flashes in the tempo of the internal sequencer.

By turning the tempo knob, the tempo is always affected in 1 BPM increments. Turn 
clockwise increases the tempo and turn counterclockwise will the lower the tempo.

The tap tempo input is realized by pushing the tempo knob.
To enter the Tap tempo you need to press the knob to the desired tempo a few times. The 
tempo is then adjusted to the desired pace.

The x0xb0x in sync out mode could be referred as a sync master, because the x0xbox at 
running sequencer sends the currently selected speed over the Din Sync and MIDI OUT. 
The outgoing Din Sync and Midi Sync signal sends out always 24 Din Sync and 24 Midi 
Sync information per note. Thus, all MIDI standard (for example: Elektron Machine Drum, 
etc.) and Din Sync devices (eg: Roland TR-808, TR-606, etc.) properly triggered.

To start the pattern sequencer, press the RUN button. The particular pattern is repeated 
until you select a new one or the RUN button is pressed to stop the sequencer. The stop 
button of the sequencer then sends a Din Sync and Midi Sync Stop signal. This stop signal 
then interrupts the sync playback, and external devices stop exactly at the same time as 
the internal sequencer of the x0xb0x. The same applies to the start of the internal 
sequencer of the x0xb0x. If RUN is pressed to start, the x0xb0x sends a Din Sync and Midi 
start signal, thus the external devices start as well.

5.4 Midi Sync

The MIDI Sync mode is designed to synchronize with external MIDI tone generator, 
sequencer or drum machine. In this mode, the internal rate is not observed. Once an 
external midi master sends a clock and the respective start signal, the external tempo is 
used. The Tempo LED will light up the tempo of the external signal. 

The MIDI Sync mode processes the following Midi informations:
Midi Start, Midi Stop, Midi Continue
Midi Notes will be ignored!

14 von 25

Sequencer

xoxbox MK 2

Mode Machines is a Division of Touched by Sound GmbH - Email: info@modemachines.com

 

M

A C H I N E S

M    DE

©

Summary of Contents for xoxbox MK2


























Reviews: