background image

This high performance model must be assembled according to the 

instructions. May cause serious injury to persons or property if not 

used responsibly or if operated without due caution. 

Unsuitable for children under 14 years old.

Assembly & Flight Training guide

 

SpecificationS

Rotor diameter (diagonal) ................................................................... 355mm

Frame length (across) ......................................................................... 187mm

Propeller diameter ............................................................................... 136mm

Height ....................................................................................................... 56mm

R/C transmitter..................................4 Channel 2.4GHz Digital Transmitter

On-board power .....................................................3.7V 500mAh Li-polymer

Flying weight ..................................................................................around 86g

Flight time per charge ................................................... Approx. 10 minutes 

Kit contentS

Twister Quad ....................................................................................................1

4-Channel 2.4GHz Digital Transmitter ..........................................................1

3.7V 500mAh lithium polymer battery pack .................................................1

Li-Po mains charger .......................................................................................1

Twister Quad instruction manual .................................................................1

FREE Spare rotor blades  .........................................................2 red, 2 black

FREE Spare body  ............................................................................................1

*Requires 6 x 1.5V AA transmitter batteries (not supplied)

ready-to-fly

ready-to-fly

V1.2

Summary of Contents for TWM1QUAD

























Reviews: