background image

Page 2

Page 19

Thank you for purchasing the Model Tech Mini Mach Racer EP ARF. We're confident that the quality of your new aircraft meets 
and even exceeds your expectations. Before completing the final assembly of your new aircraft, please carefully read through 
these assembly instructions in their entirety. Doing so will ensure your success the first time around!

These assembly instructions are designed to guide you through the entire assembly process of your new aircraft in the least amount of 
time possible. Along the way you'll learn how to properly assemble your new aircraft and also learn tips that will help you in the future.  
We have listed some of our recommendations below. Please read through them before beginning assembly.

l

  Please read through each step before beginning assembly. You 

should find the layout very complete and straightforward. Our goal 

is to guide you through assembly without any of the headaches and 
hassles that you might expect.

l

  There  are  check  boxes  next  to  each  procedure. After  you 

complete a procedure, check off the box. This will help prevent you 
from losing your place.

l

  Cover your work table with brown paper or a soft cloth, both to 

protect the table and to protect the parts.

l

  Keep a couple of small bowls or jars handy to put the small parts 

in after you open the accessory bags.

l

  We're all excited to get a new aircraft in the air, but take your 

time. This will ensure you build a straight, strong and great flying 

aircraft.

l

  If you come across this symbol 

+

, it means that this is an 

important point or an assembly hint.

This R/C aircraft is not a toy! If misused or abused, it can cause serious bodily injury and/or damage to property. Fly only in open 

areas and preferably at a dedicated R/C flying site. We suggest having a qualified instructor carefully inspect your aircraft before its first 
flight. Please carefully read and follow all instructions included with this aircraft, your radio control system and any other components 

purchased separately.

Model Tech guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This does not cover any component 

parts damaged by use, misuse or modification. 

in no case shall Model Tech's liability exceed the original cost of the purchased kit.

In that Model Tech has no control over the final assembly or material used for final assembly, no liability shall be assumed for any damage resulting from 
the use by the user of the final user-assembled product. By the act of using the final user-assembled product, the user accepts all resulting liability.

TAble oF CoNTeNTS

iNTroduCTioN

SAFeTy WArNiNG

our GuArANTee

INTRODUCTION ..........................................................................2

SAFETY WARNING .....................................................................2

OUR GUARANTEE ......................................................................2

OUR RECOMMENDATIONS .......................................................3

A NOTE ABOUT COVERING MATERIAL ....................................3

LITHIUM POLYMER BATTERY WARNINGS - PLEASE READ ...4

TOOLS AND SUPPLIES REQUIRED ..........................................5

KIT CONTENTS ...........................................................................5

TIPS FROM THE PROS ...............................................................6

CONTROL SURFACE HINGING ..................................................6

ELEVON CONTROL SYSTEM INSTALLATION ...........................7

LANDING SKID AND MOTOR INSTALLATION ...........................9

VERTICAL STABILISERS INSTALLATION ................................12

FINAL ASSEMBLY ......................................................................13

C/G AND BALANCING ...............................................................15

AIRCRAFT SETUP INFORMATION ...........................................15

CONTROL THROWS .................................................................16

PREFLIGHT CHECK AND SAFETY ..........................................17

REPLACEMENT PARTS LIST ...................................................17

PRODUCT EVALUATION SHEET ..............................................19

ProduCT eVAluATioN SheeT

Telling us what you like and don't like determines what model kits we make and how we make them. We would appreciate it if you would take a few 
minutes of your time to answer the following questions about this kit and your modeling interests. Simply fold this form on the dotted lines, seal with 
tape and mail it to us. 

Do not use staples and make sure our address faces out

.

Global Hobby Distributors will not disclose the information it collects to outside parties. Global Hobby Distributors does not sell, 

trade, or rent your personal information to others. Your privacy is important to us.

1)  Kit: 

 Model Tech Mini Mach racer eP ArF # MT3211C

2)  Where did you learn about this kit?
 

q

  Magazine Ads 

q

  Friend

 

q

  Hobby Shop  

q

  Other

 

q

  Internet

3)  What influenced you the most to buy this kit?

 

q

  Magazine Ads 

q

  Price

 

q

  Type of Model 

q

  Box Art

 

q

  Recommendation 

q

  Other

 

q

  Internet

4)  Did you have any trouble understanding the written instructions?  If  
 

yes, please explain.

 

q

  Yes   

 

q

  No

 

                                                  

                                                  

                                                  

                                                  

5)  Did you have any trouble understanding any of the photographs?   
 

If yes, please explain.

 

q

  Yes   

 

q

  No

                                                  

                                                  

                                                  

                                                  

6)  Were any of the kit parts:
 

q

  Damaged   

q

  Wrong Size

 

q

  Missing 

 

q

  Wrong Shape

  
 

If you checked any of the boxes above, did you contact our  

 

Customer Service Department to resolve the problem?

 

q

  Yes   

 

q

  No 

7)  Was any of the assembly difficult for you?  If   yes, please explain.

 

q

  Yes 

 

 

q

  No

 

                                                

                                                  

                                                  

                                                  

8)  What did you like most about this kit?
 

q

  Assembly Manual 

q

  Parts Fit

 

q

  Hardware Supplied 

q

  Price

 

q

  Other

     

   

 

9)  What did you like least about this kit?
 

q

  Assembly Manual 

q

  Parts Fit

 

q

  Hardware Supplied 

q

  Price

 

q

  Other

     

   

 

10)  Are you satisfied with the finished model?  If no, please explain.

 

q

  Yes 

 

 

q

  No

 

                                               

 

                                               

 

                                               

 

                                               

11)  How does this kit compare to similar kits by other manufacturers?
 

q

  Better   

 

q

  As Good

  What is Your Age Group:
 

q

  10 & Under 

q

  11 - 20 

q

  21 - 30 

q

  31 - 40 

q

  41 - 50 

q

  51 - 60 

q

  61 - 70 

q

  71 +

  How Many Years Have You Been in the Hobby?
 

q

  Less than 1 

q

  2 - 4 

q

  5 - 7 

q

  8 - 10 

q

  11 - 15 

q

  16 - 20 

q

  20 or More

  How Many Models Have You Purchased In the Last Year?
 

q

  0 - 1 

q

  2 - 4 

q

  5 - 7 

q

  8 - 10 

q

   10 or More

Please List any Other Modeling Interests or any Additional Information about This Product:
                                                                                                                        
                                                                                                                         
                                                                                                                        
                                                                                                                         
                                                                                                                        
                                                                                                                         
                                                                                                                        
                                                                                                                         
                                                                                                                        
                                                                                                                         
                                                                                                                        

QC #

Summary of Contents for Mini Mach Racer











Reviews: