72
f) Function "6:TH CURV", Setting the Gas/Braking Curve
The gas curve can be adjusted in three different ways with this remote control.
Selecting the Setting Mode "EXP", "CUR" and "VTR"
• From within the main menu (see fig. 5) press the "ENTER" button, then you
can use the "+" or "-" buttons to select the "6:TH CURV" function (fig 28).
• Then press the "ENTER" button again to reach the settings menu (fig 29).
• With the "+" and "-" you can select one of the three setting modes ("EXP",
"CUR" and "VTR" - the "M" field is framed black - that means that the mode
can be selected).
In figure 29, 30 and 31 you can see the three settings modes.
• Once you have selected your desired setting mode, press the "ENTER"
button.
EXP: Set the gas curve as an exponential curve
CUR: Change the gas curve through 3 set servo positions (at 25%, 50% and
75%).
VTR: Change the shape of the gas curve using a freely adjustable servo
position (0-100%)
Please note:
The braking curve can only be set as an exponential curve in all
three setting modes.
The exact description of the individual setting modes is available in the
following pages.
Function11.2V
5:ST CURV
6:TH CURV
7:ABS
8:MODEL
Figure 28
TH_CURV 11.2V
M
:EXP
R: 0
BR: 0
Figure 29
TH_CURV 11.2V
M
:CUR
1 2 3
R: 25
BR: 0
TH_CURV 11.2V
M
:VTR
P: 50
R: 50
BR: 0
Figure 30
Figure 31
Summary of Contents for 20 72 54
Page 200: ...198 ...
Page 201: ...199 ...
