82
• From within the main menu (see fig. 5) press the "ENTER" button, then you
can use the "+" or "-" buttons to select the "9:SPEED" function (fig 62).
• Then press the "ENTER" button again to reach the settings menu (fig 66).
• You can use the "+" and "-" buttons to switch between the two servos "ST" =
steering servo (fig 66) and "TH" = gas/braking servo (fig 67).
• Press the "ENTER" button.
The steering servo can be switched between the turn (in fig 66 this is
"SPD.FL") and return (fig 66 "SPD.BK") speeds by pressing the "ENTER"
button.
• Adjust the value in the range between 0% and 100% with the "+" and "-"
buttons (factory setting is 0% for each).
Exit the settings menu with the "EXIT" button, the settings are automatically
saved.
The setting for the steering servo leads to the vehicle not reacting violently to fast movements of the
steering wheel.
The setting for the gas/braking servo can reduce the slipping of the wheels during fast acceleration.
The limitation of the turning in and turning out speed only takes effect if the steering wheel (or the lever
for the gas/brake) is moved faster than the respectively set value. Slower movements are transmitted
1:1 to the steering servo.
SPEED 11.2V
ST
TH
SPD.FL.0 %
SPD.BK:0 %
SPEED 11.2V
ST
TH
SPD.FL.0 %
Figure 66
Figure 67
Summary of Contents for 20 72 54
Page 200: ...198 ...
Page 201: ...199 ...
