12
NOTE:
Make sure the filter is securely locked. Otherwise, it would loosen and cause dangerous. When activated carbon filter
attached, the suction power will be lowered.
The following shows how to reduce total environmental impact (e.g. energy use) of the cooking process).
1. Install the cooker hood in a proper place where there is efficient ventilation.
2. Clean the cooker hood regularly so as not to block the airway.
3. Remember to switch off the cooker hood light after cooking.
4.
Remember to switch off the cooker hood after cooking.
Please perform checking procedure on the following things before contacting MODENA service center when
troubleshooting occurs
:
PROBLEM
CAUSE
SOLUTION
Reduced
suction
power.
Dirty aluminum / acrylic
filter Dirty carbon filter.
Clean the aluminum filter, dry it and place it
back on the vent hood.
Replace the carbon filter foam with a new one.
Motor stop working after a
while.
Safety thermal regulator is active.
The vent hood is installed too close to the
stove.
Air circulation is not optimal. Contact
MODENA Service Center.
Light on, but fan does
not work.
The fan blade is jammed.
Switch of the unit and Contact
MODENA Service Center.
The motor is damaged.
Both light and fan do not
work.
Light bulb is burn.
Replace the bulb with correct rating.
Power cord looses
Plug in to the power supply again.
The fan blade is damaged.
Switch of the unit.
Part 6: Problem and Solution
