English 12
PREP ARATIONS BEFORE INSTALLI NG THE EX HAUST HOOD
1. Remove the exhaust hood from its packagi ng and put it on an even
place.
2. Open the aluminum filter by sliding the fixing grid handle
A
.
Remove the Equipments from inside of exhaust hood.,
3. Cover again the aluminum filter.
INSTALATION OF EXHAUST HOOD
Installation BX 9603 and BX 6603 on the wall.
1. Drill four (4) Ø 8mm holes in a suitable place according to the centre distance of the
mounting points at the back of the unit.
2. Insert the fisher into the holes.
3. Insert two screws into the upper fisher and tighten.
4. Put up the exhaust hood onto the fixed screws.
5. Then use the attached accessories adaptor onto the exhaust hole, install two holes
form inside the hood, and then fix the screws to tighten the hood onto the wall.
Installation BX 9603 and BX 6603 under kitchen cabinet.
1. Make a hole in the kitchen cabinet. The size of the hole for the
exhaust hood should be proportional to the product to be
installed (see placing hole size specifications table).
2. Make 1 hole minimum diameter 120 mm under kitchen cabinet
at back side for exhaust the air.
3. Drill 6 holes the diameter 4 mm, under kitchen cabinet.
4.
Install the hood into the built-in hole and then tighten using 6
screws enclosed.
5.
Install 2 pieces holders accessories on the bottom
of the hood in order to keep out the gap between
hood back and kitchen cabinet.
