English
14
ES 30V, ES 50V, ES 80V & ES 100V
BEFORE INSTALLATION
1. Place the water heater in the desired place.
2. Do not use water pipes as the water heater buffer.
3. Make sure water heater is installed in an upright position.
4. Install a water heater in the wall that can withstand the weight. If the walls are made of gypsum
installation of the water heater should be strengthened.
5. It is normal if there is little water flow in safety valves upon heating. Connect the safety valve with
a hose to empty the hot water.
6. Safety valve should be cleaned regularly to remove dirt around it so they will not be clogged.
If you need to empty the tank, do the following:
First, close the end cap of the valves, open the end of the existing water valve.
Then remove the existing screws on the safety valve with a screwdriver.
Lift the plastic flow, let the water in the tank flow out naturally.
Part 2:
Installation
Summary of Contents for Circolo - ES 10 B
