7
Electrical Connection
•
Electrical connection must be done by a qualified technician.
•
Electrical (power) supply is connected directly to the connector
provided with the
grounding
connection. The ground cord must be
green/yellow in color and attached to the terminal marked by the
grounding
symbol.
•
The water heater must be connected to the power supply that out
of reach from the person who is using shower.
•
All wiring must conform to the local requirements.
NOTE
All plumbing connections must be done completely before doing
the electrical connections. Fill the tank with water and switch on
the valve to let the water exiting out until all the air inside the tank
has been expelled out. The electricity should only be turned on
after the tank is full of water.
Hot Water
Outlet
Triple Pipe Connection
Basin/
Water-pool
Safety Valve/Pressure Relief Valve
Water Inlet
Pipe
Mixing
Valve
Shower
Drainage Pipe
Cold Water Inlet/Supply
