12
•
Do not allow such substances to come in contact with the appliances.
•
Do not use abrasive cleaners.
•
Remove the foods from the freezer and store in a cool and well covered
place.
•
Clean the interior and accessories using cloth and lukewarm water. After
that, clean with clean water and dry completely.
•
Dust can accumulate on the condenser and cause performance drop.
Clean the freezer condenser at least once a year using soft brush or
vacuum cleaner.
•
After everything is dried completely, install the accessories and freezer
to the initial position.
DEFROSTING
Freezer will become progressively covered with frost and must be cleaned.
Do not use sharp metal objects to scrape the frost because it can damage
the freezer. Use plastic scraper.
If the accumulated frost becomes very thick, complete defrosting should be
performed as follows:
•
Unplug the unit. Remove the inner drain plug. Open the door and let it
open to accelerate the defrost process. Defrosting usually takes a few
hours.
•
To collect the defrost water, place a tray beneath the outer drain hole.
•
Pull the outer drain dial and rotate 180°. The defrost water will flow out
of the freezer.
•
When finished, push the outer drain plug back to its place. Reinstall the
inner drain plug. Monitor the water level in the tray to avoid overflow.
•
Clean the interior of the freezer and plug the power cord.
•
Adjust the thermostat knob to the desired position.
IMPORTANT!
Essential oils and organic solvent may damage plastic
components. For example lemon water, orange water, butyric acid,
cleaner that contains acetic acid.