English 16
Creating holes on the wall and methods for installing bracket
Model
A (cm )
B (cm )
C (cm )
CX 9753
37.5
39
39
CX 9330
34.5
20.5
49
CX 6330
34.5
20.5
49
CX 9150
34.5
20.5
49
CX 6150
34.5
20.5
49
Note s:
-
Height / distance are 65
– 75 cm, except for CX 9753 type where the height / distance is 35 – 40 cm.
-
For CX 9753, we recommend installation for use with a stove without top cover.
-
Height / Distance C can be shortened in accordance with the ceiling height.
-
Make a vertical line on the wall to its highest point or to an appropriate height on the center part of the
area where the vent hood is to be installed
-
Make a horizontal line at H (cm) distance from the sto ve to mark the lowest limit for the vent hood.
-
Install bracket I on t he wall just like in the above picture up to height A and mark the holes for dynabolt
and fischer. Specially CX 9753, Attach the unit on the wall up to height A and mark the holes for
dynabolt/fischer/screw.
-
Install bracket II on the wall just like in the above picture up to height B and mark the holes for fischer
hole.
-
Install bracket III on the wall just like in the above picture up to height C and mark the holes for fischer
hole.
-
Drill the wall with a Ø 10 mm for dy nabolt and
ϕ
8 mm for fischer in all marked sections.
-
Insert the dynabolt and fischer into the hole.
-
Install all brackets using nut for dynabolt and screw for the available fischer.
Installing the Hood Body
-
Install hood body on the bracket I on the wall, or on the screw
head specially for CX 9753.
-
Connect the exhaust system with the spigot / flange if the vent
hood is to be operated as a ducting / exhaust system.
