9
First, open the outlet valve, and then open the inlet valve. The
water heater gets filled with the water. When the water flows out
of the outlet pipe, it implies that the water heater has been filled
fully with water. Then, closes the outlet valve.
Insert the power plug into the power socket.
If the indicator lamp lights up, the thermostat will automatically
control the temperature. When the water temperature inside the
heating tank has reached the set temperature, the water heater
will switch off automatically. If the water temperature falls below
the set point, the water heater will turn on automatically to restore
the default temperature.
Rotate the knob according to the knob marker to increase or
decrease the temperature.
In a power-on state, the water heater is heating when the
indicator light turns blue. The indicator light will turn off when the
heating process is finished, and the water heater is in the
insulating state.
PART 4: HOW TO USE
