4
The pressure relief valve attached with the water heater must be
installed at the cold water inlet of the appliance (Picture 1), and
ensure it is not exposed in the foggy. The water may be flowed out
from the pressure relief valve, so the outflow pipe must be opened
wide towards the air. The pressure relief valve needs to be
checked and cleaned regularly to avoid blockage.
When using the water heater for the first time (or for the first use
after maintenance), the water heater cannot be switched on until it
has been filled fully with water. When filling it with water, at least
one of the outlet valves of the water heater must be opened wide
to exhaust the air. This valve can be closed after the water heater
has been filled fully with water.
This water heater is not intended to be used by persons with
special needs for their physical, sensory or mental capabilities
(including children), unless they have been given the supervision or
instructions concerning the use of the appliance by a person who
responsible for their safety. Children should be supervised to
ensure that they are not playing with this water heater
During the heating process, there may be drops of water dripping
from the pressure relief hole, and this is a normal case. If there is
an over-leaking, please contact
MODENA
Customer Care for
repair. This pressure relief hole should, under no circumstances, be
Picture 1
Machine Body
Hot Water Outlet Pipe
Nut for Hot Water Outlet
Water Inlet Mouth’s Copper Nut
Handle for Mixing Valve
Shower
Pressure Relief/Safety Valve
Cold Water Inlet Pipe
Pressure Relief Hole
