English 3
Before installing this electric storage water heater, check and ensure that the
power socket is reliably grounded. Otherwise, this water heater cannot be
installed and used yet. Do not use the extension cord if the power socket is
damaged. Incorrect installation and use of this water heater may result in
serious injuries and loss of property.
Special Caution
•
This appliance (water heater) is not intended to be used by persons with
special needs for their physical, sensory or mental capabilities, or lack of
experience and knowledge (including children), unless they have been given
the supervision or instructions concerning the use of the appliance by a
person who responsible for their safety. Children should be supervised to
ensure that they are not playing with this water heater.
•
The wall in which this water heater is installed should be able to bear the
twice bigger load than the weight of this water heater filled fully with water
without distortion and cracks. Otherwise, other strengthening measures
should be adopted.
•
The power socket must be earthed (grounded) reliably. The installation
height of the power socket should not be lower than 1.8 m. The rated current
of the socket should not be lower than 16A.
•
The power socket and the power plug should be kept dry to prevent
electrical leakage. If the flexible power cord is damaged, a special power cord
that is provided by manufacturer must be selected, and replaced by professional
maintenance personnel. Contact
MODENA
Customer Care for help.
•
For the correct operation of the appliance, it is necessary to pay attention
that the maximum inlet water pressure is 0.75 MPa, and the minimum inlet
water pressure is 0.1 MPa
•
When using the water heater for the first time (or for the first use after
maintenance), the water heater cannot be switched on until it has been filled
fully with water. When filling the water, at least one of the outlet valves of
the water heater must be opened to exhaust the air. This valve can be closed
after the water heater has been filled fully with water.
•
The pressure relief valve that attached with the water heater must be
installed at the cold water inlet of this water heater, and make sure it is not
PART 1: IMPORTANT SAFETY INFORMATION
