English
14
Do not put the freezer near the heat source
such as stove, hot plates etc. and avoid
placing freezer under direct sunlight which
may hamper with the cooling process.
Do not expose the freezer to rain water. Using
freezer which has been exposed to rainwater
will result in electricity leakage.
Make sure the voltage is set to 220 volt and
the frequency to 50 Hz. Do not use cord
extension or branched outlet since it poses
risks of shortage, overheating and fire.
If the unit must be installed in a humid
environment, make sure to install a circuit
breaker to avoid shortage.
PREPARATION BEFORE USE
-
Open the carton box, lift and put the freezer on an even surface.
-
Clean the inside of the freezer with warm water and dry it with clean cloth.
-
Open the door for some time for ventilation purpose, close it and plug the power cord to
the outlet to start
the freezer.
-
Leave the unit operational for around 2 hours to cool the inner chamber before putting objects inside
it.
UNDERSTANDING THE THERMOSTAT
-
To adjust the temperature inside the freezer, use the buttons on the lower front part of the
household freezer. For
normal usage, household freezer is set to between FREEZING
– MIN and FREEZING – MAX.
-
Temperature cannot be set to FREEZING
– MAX for long periods of time. This setup should only
be used to freeze
food in short period of time. After the food is frozen, the thermostat must be set back to between
FREEZING
– MIN
and FREEZING
– MAX.
-
Temperature is set between COOLING-MIN and COOLING-MAX to cool packaged drinks and other
food/drink items
which do not necessarily have to be frozen.
-
When left unused for long period of time, turn the thermostat to COOLING
– MIN.
Part 3:
How to Use
