7
Before Using Freezer
•
Remove the exterior and interior packing.
•
Check to be sure you have all of the following parts:
o
1 Storage Basket
o
1 Instruction Manual
•
Before connecting the freezer to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility
of a malfunction in the cooling system from handling during
transportation.
•
Clean the interior surface with lukewarm water using a soft
cloth.
Electrical Connection
•
This freezer should be properly grounded for your safety. The power
cord of this freezer is equipped with a three pin plug which mates with
standard three pin wall socket to minimize the possibility of electrical
shock.
•
Do not, under any circumstances, cut or remove the three pin plug from
the power cord supplied.
•
This freezer requires a standard 220-240 Volt A.C. ~/50Hz electrical
outlet with three pin wall socket.
•
This freezer is not designed to be used with an inverter.
•
The cord should be secured behind the freezer and not left exposed or
dangling to prevent accidental injury.
•
Never unplug the freezer by pulling the power cord. Always grip the
plug firmly and pull straight out from the receptacle.
•
Do not use an extension cord with this appliance. If the power cord is
too short, have a qualified electrician or service technician install an
outlet near the appliance. Use of an extension cord can negatively
affect the performance of the unit.
PART 3: INSTALLATION
WARNING
Improper use of the grounded plug can result in the risk of
electrical shock. If the power cord is damaged, have it replaced
by an authorized service center.
