8
Electricity Connection
MODENA Exhaust Hood is designed for 220 volt electricity input, single phase with 50 Hz of frequency. This
appliance uses a double-insulated power cord (2 parallel cords) and should not be connected to a grounding wire.
Attention
Overall installation should be performed by a competent person in the field of electrical or able to do the
installation. If you will do the installation yourself, it is recommended that at first consult to the Service Center
Modena.
Details of the method and frequency of cleaning listed in the "Installation and Maintenance"
To separate the equipment from the power source should not attract a wired connection, but the pull of the base
/ head power cable
•
Connect the power cord with an electrical outlet.
•
Slide or press the motor speed regulator button and light switch to turn vent hood on or off as shown in the
following picture.
Notes:
Adjust the motor speed of the vent hood according to the thickness of smoke / steam generated by the cooking
process.
Touch button
=
On / Off button
=
Speed decrease button
=
Display
=
Speed increase button
=
Lamp button
To active the Timer, press Lamp button
and hold for 1 up to 3 seconds. The digital display will flash and into 5
minutes countdown. After 5 minutes, the motor and the lamp will be turn off automatically, the buzzer sound for 1
second
ATTENTION:
•
Avoid direct contact between the vent hood and open flames from
the stove.
•
To obtain optimum filtering result, turn off the vent hood 20
– 30
minutes after having finished cooking.
•
Children must be supervised to ensure they do not play with the
equipment.
•
This hood is designed for household use only.
Part 4: How to Use
