12
FREQUENTLY ASKED QUESTIONS
Q. How do you program the remote control?
A. The remote comes pre-programmed. No programming is necessary.
Q. What distance can the remote be used from the fireplace?
A. Optimal distance for the remote control is within 10 meters.
Q. Can you turn on the fireplace via the touch screen and off via the remote (or vise versa)?
A. Yes.
Q. My touch screen will not operate properly.
A. The fireplace must be installed to a plumb vertical wall for correct operation of touch controls. Re-
move power source for 30 seconds to allow unit to reset. Attach glass face, turn on power and wait
for indicator lights to turn off.
Q. Low long will the LED lights last?
A. LED Lamps have a life span of up to 20 years.
Q. Can the sensitivity of the touch screen be adjusted?
A. Yes, but only by the factory. Not just any technician will be able to adjust the touch screen sensi-
tivity.
Q. Can the fireplace be installed outside?
A. No. Please review the entire safety chapter before installing this fireplace.
Q. Does the fireplace need to be on a dedicated 15 amp circuit?
A. Yes.
Q. What thickness of sheetrock should be used for the recessed installation?
A. 12mm or 16mm.
Q. How often do the batteries in the remote need to be replaced?
A. Annually, possibly more with heavy use.
Q. Is there a remote receiver in the fireplace that requires batteries?
A. No, only the actual remote requires batteries. The rest of the fireplace runs entirely off of the
main power supply.
MAINTENANCE
MAINTENANCE
AL40WMB
WALL MOUNT BRACKET AL1000
AL60WMB
WALL MOUNT BRACKET AL1500
AL80WMB
WALL MOUNT BRACKET AL2000
AL100WMB
WALL MOUNT BRACKET AL2500
AL144WMB
WALL MOUNT BRACKET AL3600
ALGLS40
GLASS FACE AL1000
ALGLS60
GLASS FACE AL1500
ALGLS80
GLASS FACE AL2000
ALGLS100
GLASS FACE AL2500
ALGLS144
GLASS FACE AL3600
