12
Operation
Read and understand
this entire owner’s manual, including
all safety information
, before
plugging in
or
using
this product. Failure to do so could result in
electric shock, fire,
serious injury, or death.
Power
Plug the power cord into a dedicated 110~120 Volt 15 Amp grounded outlet (see
IMPORTANT
SAFETY INFORMATION
on
Pages 2 and 3
). Make sure the outlet is in good condition and the plug is
not loose.
NEVER
exceed the maximum amperage for the circuit.
DO NOT
plug other appliances into
the same circuit.
Methods of Operation
This electric fireplace can be operated by the TOUCH-ON CONTROL PANEL, located on the lower
right corner of the fireplace or by the battery-powered REMOTE CONTROL.
Remote Control & Touch-on Control Panel Operation
BUTTON
FUNCTION
ACTION & INDICATION
POWER
ON
: Enables control panel functions and
remote control. Turns on flame effect.
OFF
: Disables control panel functions and
remote control. Turns off flame effect.
1.
Press once
. Indicator light turns on.
Power turns on. All functions enabled.
2.
Press again
. Flame effect turns off. Unit
goes to standby. All functions turn off.
TIMER
TIMER button
: Controls timer settings to
turn off fireplace at selected time.
Settings range from 0.5 hours to 7.5 hours.
1.
Press once
. Indicator light turns on.
Timer is set to 0.5 hours.
2.
Press again until desired setting is
reached
. Raises in 0.5 increments.
Remote control
Touch on control panel
Summary of Contents for CEF-50B
Page 15: ...15 ...
