8
Fully recessed installation
Note: Remove power cord and complete hardwiring (see “hardwiring installation” section).
Have two people to lift the fireplace and insert to the wall opening hole.
If the appliance is fully recessed into the wall:
• Use the 6 screws (provided) to lock the appliance into the wall with the existing two side
flanges, see
Figure 2-1
• Install the media and re-install the glass front.
Fig. 2-1
If partial recess into the wall:
• Use the four mounting metal brackets
H
(supplied) to lock the appliance to the wall, see
Figure 2-3
NOTE: Using the existing holes on sides of the appliance for recessing into wall.
Fireplace will be like this after installation
Figure 2-4
Fig. 2-2
Fig. 2-3
Fig. 2-4
Summary of Contents for CEF-50B
Page 15: ...15 ...
