Modern Flames Landscape Pro Multiview LPM-4216, Installation And Owner'S Manual

8

INSTALLATION

Fully recessed installation - 1 side

Fully recessed flush installation

1.  Follow steps 1 & 2 from the 3 sided installation 

instructions.

2.  Remove the corresponding drywall stops 

according to your installation (in the example, 

the drywall stops on the left end would be 

removed.)

3.  Install the side glass then the corresponding 

side cover according to your installation (the 

side glass must be installed before the metal 

side cover.)

4. 

Install the fire unit in the framed opening with a 

minimum 1 ¼ drywall screws to secure the unit. 

5. 

Mask the exposed fire unit during the 

drywall process.

 Install drywall to the drywall 

stops on the perimeter of the fire box. For 

more information on the drywall stops see the 

Product Guide on page 4. Decorate as desired.

6.  Install the remaining side glass and front glass.

1.  Follow steps 1 & 2 from the 3 sided installation 

instructions.

2.  Remove the drywall stops on both sides of the 

fire unit.

3.  Install the side glass then side covers on both 

sides of the fire unit (the side glass must be 

installed before the metal side cover.)

4. 

Install the fire unit in the framed opening with a 

minimum 1 ¼ drywall screws to secure the unit.

5. 

Mask the exposed fire unit during the 

drywall process.

 Install drywall to the drywall 

stops on the perimeter of the fire box. For 

more information on the drywall stops see the 

Product Guide on page 4. Decorate as desired.

6.  Install the front glass.