13
CLEANING AND MAINTENANCE INSTRUCTIONS
There is very little maintenance involved with your electric fireplace. Please follow the few points be-
low:
On a semi-annual basis unplug the machine from it’s power source and wait for the heating ele-
ment to cool, remove the glass face of the fireplace and dust the fire unit with a dry cloth. Be
careful not to brush any wires that may be exposed as you do this.
To clean the glass face of the fireplace simply use your desired glass cleaner with paper towels.
To clean the air inlets/outlets, wipe with a soft cloth or the nozzle of a vacuum cleaner
Dust can easily build up around the heater area under the appliance. Take particular care to
clean this area on a regular basis to prevent buildup.
WIRING DIAGRAM
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
A. Wiring is loose
A. Disconnect unit from power
source and inspect for loose
connections
Heater does not provide
heat when on
B. Thermal snap disc has been
tripped
B. Turn the main breaker to the “off”
position for 30 seconds. Next flip the
breaker back into the “on” position.
C. Heater core is defective
C. Replace Heater Core
MAINTENANCE
