background image

 3 

 

USER INSTRUCTIONS 

TABLE OF CONTENTS 

Important Instructions .................................. 2 
Power Data ................................................. 3 
Product Guide ............................................. 4 
Box Contents ............................................... 4 
Locating Fireplace ....................................... 5 
Installation ................................................... 6 

WARNING:  Improper  installation,  adjust-
ment,  alteration,  service  or  maintenance 
can cause injury or property damage. Re-
fer  to  this  manual. For assistance or ad-
ditional  information,  consult  a  qualified 
installer.

 

CAUTION:  Do  not  expose  the  heater  to 
the elements (such as rain, etc).

 

Do not place clothing or other flammable 
material  on  or  near  firebox.  Never  place 
any objects on the fireplace.

 

Carefully supervise young children when 
they are in the room with fireplace.

 

Fireplace  becomes  very  hot  when  run-
ning.  Keep  children  and  adults  away 
from  hot  surfaces  to  avoid  burns  or 
clothing  ignition.  Fireplace  will  remain 
hot for a time after shutdown. Allow sur-
faces to cool before touching.

 

Operation ................................................... 9 
Service Parts .............................................. 10 
Frequently Asked Questions ...................... 11 
Troubleshooting ......................................... 11 
Cleaning and Maintenance Instructions ..... 13 
Wiring Diagram .......................................... 13 

IMPORTANT INSTRUCTIONS 

CAUTION: In order to avoid over-
heating, do not cover the heater.

 

1.  Read all instructions before installing or 
using this heater. 
2.  This heater is hot when in use. To avoid 
burns, do not let bare skin touch hot surfaces. 
Keep combustible materials, such as furniture, 
pillows, bedding, papers, clothes, and curtains 
at least 3 feet (0.9m) from the front of the 
heater and keep them away from the sides 
and rear. 
3.  Extreme caution is necessary when any 
heater is used by or near children or disabled 
people and whenever the heater is left 
operating and unattended. 
4.  Do not operate any heater after it 
malfunctions, has been dropped, or damaged 
in any manner. Disconnect power at service 
panel and have heater inspected by an 
authorized technician or a reputable 
electrician before using. 
5.  Do not use outdoors. 
6.  To disconnect heater, turn controls to off 
and turn off power to heater circuit at main 
disconnect panel. 
7.  Do not insert or allow foreign objects to 
enter any ventilation or exhaust opening as 
this may cause an electric shock or fire, or 
damage the heater. 
8.  To prevent a possible fire, do not block air 
intakes or exhaust in any manner. 
9.  A heater has hot and arcing or sparking 
parts inside. Do not use it in areas where 
gasoline, paint or flammable vapors or liquids 
are used or stored. 
10. Use this heater only as described in this 
manual. Any other use not recommended by 
the manufacturer may cause fire, electric 
shock or injury to persons. 
11. This heater is not intended for use in 
bathrooms, laundry areas and similar indoor 
locations. Never locate heater where it may 
fall into a bathtub or other water container. 
12. SAVE THESE INSTRUCTIONS 

When  using  electrical  heaters,  basic  precau-
tions should always be followed to reduce the 
risk  of  fire,  electric  shock  and  injury  to 
persons, including the following: 

Summary of Contents for LFV100015-SH

















Reviews: