9
MAINTENANCE
OPERATION
The unit is hardwired and has no main switch. (Caution: If servicing this unit, turn off power at the
main circuit breaker.) An optional tethered wall control switch is included, refer to installation
instructions to relocate the tethered wall control switch to a wall location.
When all indicator lights are off, touching any
button will only show the status. Once the
indicator lights are on you can begin
operation. Touch the power button to turn the
machine on. This will be indicated by 1 orange
LED light. The Heat button can be pressed
multiple times and will turn on low, high and
off in that order. The Backlight button turns on
high, medium, low and off in that order.
Power Heat Backlight
When the switch turns on, this orange pilot
lamp is always on. It shows the fire is
energized.
The status light above shows that the power is
on and the heater is on low
The status light above shows that the power is
on and the heater is on high
The included remote functions in the
same manner as the buttons on the
tethered wall control switch
