22
https://www.modernflames.com
Operation
– Touch Control Panel
Touch Panel Operation
Button
Function
Action
ON:
Enables control panel functions. Turns
on flame.
OFF:
Disables control panel functions.
Turns off flame.
1.
Press once:
Indicator light turns on. Power turns
on. All functions enabled.
2.
Press again:
Flame turns off. Unit goes to standby.
All functions turn off.
3.
Press & Hold
for 5 seconds: Places fireplace in
remote paring mode. Displays
P1
while pairing.
FLAME BUTTON:
Changes between
flame presets.
NOTE:
Color effect stays on until power
button is turned off.
NOTE:
This fireplace has memory function
for flame presets.
1.
Press once:
Flame color illuminates.
2.
Press again
until desired preset color is reached.
In total, three styles of flame with six colors for each
flame.
1C-2C-3C-4C-5C-6C
NOTE:
Press and hold for 5 seconds to start
connecting with App.
HEATER BUTTON:
Turns heater on and
off.
NOTE:
The heater only works when the
flame is on. If the flame is off, the heater
will not turn on.
NOTE:
To prevent overheating, the heater
fan will blow cool air for 8-10 seconds after
the heater turns off.
1.
Press once:
Turns the heater and blower on.
2. Press again
until it cycles thru the heater settings.
Settings:
H0
- Heater and blower off.
F
– Fan only.
H1
- Low Heat.
H2
- High Heat.
NOTE:
Press and hold the heater button for 5
seconds to lock/unlock the heater and thermostat.
H0
will be displayed when locked.
TIMER BUTTON:
Controls timer settings
to turn off fireplace at selected time.
Settings range from 30 min to 8 hours.
1.
Press once:
Indicator light turns on. Timer defaults
to 0.5 hours.
2.
Press again
until desired setting is reached.
00(off)-30-1H-2H-3H-4H-5H-6H-7H-8H
