16
https://www.modernflames.com
Operation – Remote Control (Continued)
Button
Function
Action
MEDIA BED BUTTON:
Cycles media bed
colors.
NOTE:
Media bed color effect stays on
until power button is turned off.
This fireplace has memory function for
media bed settings.
1. Press once:
Turns on ember bed.
2. Press again
until desired color is reached. In total
ten colors and one fade mode.
01-02-03-04-05-06-07-
08-09-10-11
MEDIA BRIGHTNESS BUTTON:
Makes
media bed dimmer and brighter.
NOTE:
LED media light brightness stays
on until power button is turned off.
1.
Press once:
Brightness becomes active.
2.
Press again
until desired setting is reached. In total
5 levels.
From
E4 - E3 - E2 - E1 - E0
(off)
TIMER BUTTON:
Controls timer settings
to turn off fireplace at selected time.
Settings range from 30 min to 8 hours.
1.
Press once:
Indicator light turns on. Timer defaults
to 0.5 hours.
2.
Press again
until desired setting is reached.
00(off)-30-1H-2H-3H-4H-5H-6H-7H-8H
HEATER BUTTON:
Turns heater on and
off.
NOTE:
The heater only works when the
flame is on. If the flame is off, the heater
will not turn on.
NOTE:
To prevent overheating, the heater
fan will blow cool air for 8-10 seconds after
the heater turns off.
1.
Press once:
Turns the heater and blower on.
2.
Pressing Additionally:
Cycles thru heater settings.
Settings:
H0
- Heater and blower off
F
– Fan only
H1
- Low Heater
H2
- High Heater
NOTE:
Press and hold the heater button for 5
seconds to lock/unlock the heater and thermostat.
