9
https://www.modernflames.com
Wall Recessed Installation
•
Remove power cord and complete hardwiring (see “Hardwiring Installation” section).
•
Remove the two screws (one per side) from the inside of the appliance and remove the interior
walls. (Fig.2-1).
Set the screws/walls aside.
•
Insert the appliance into the openings (See “Finished Opening Dimensions”) (Fig.2-2) and then
secure it by installing 4 screws (supplied) into the slots on the insides (2 per side) (Fig.2-3).
•
Next reinstall the two interior walls and two screws previously removed. (Fig.2-4).
•
Re-install the front glass. (Fig.2-5)
This product includes a GLASS panel. Always use extreme caution when handling
glass. Failure to do so could result in personal injury or property damage.
