14
(Insert Installation Continued)
Remove Front Glass
A. With one hand on the front glass to prevent it from falling, remove the screws from the top of the
glass. Set the screws aside.
B. Lean the glass towards you. With hands on each side of the glass, carefully lift the front glass up
and away from the fireplace. Place it face-down on a soft, non-abrasive surface.
C. Reverse these steps to install the front glass.
NOTE: PLEASE DO NOT LIFT THE GLASS UP BY LIFTING THE “U” SHAPE METAL BRACKET.
Choose Trim Size
The fireplace is shipped with the 5/8 inch (16mm) trim already attached to the fireplace. Included in
the box with the fireplace is a thicker 1-5/8 inch (41mm) trim. Either trim can be installed and is up to
the discretion of the installer.
To remove and install trim:
1) Remove trim screws with phillips screwdriver (screws located around the perimeter of the trim).
2) Remove old trim.
3) Install new trim in reverse order. (additional screws are provided in the hardware kit if needed)
Extra wide trim sets are available and sold separately. See last section in this manual for sizes.
Summary of Contents for Redstone RS-2621-AU
Page 23: ...23 ...