20
Care and Maintenance
Cleaning
ALWAYS
turn the heater
OFF
and
remove the power from the fireplace
before
cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in
electric shock, fire, or personal injury
.
NEVER immerse in water
or
spray with water.
Doing so could result in
electric shock,
fire, or personal injury.
Metal:
•
Clean using a soft cloth, slightly dampened with soapy water.
•
DO NOT
use brass polish or household cleaners as these products will damage the metal trim.
Glass:
•
Use a good quality glass cleaner sprayed onto the cloth or towel. Dry thoroughly with a paper
towel or lint-free cloth.
•
NEVER
use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
Vents:
•
Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
Plastic:
•
Wipe gently with a slightly damp cloth and a mild solution of dish soap and warm water.
•
NEVER
use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
Maintenance
Risk of
electric shock
!
DO NOT OPEN any panels!
No user-serviceable parts inside!
ALWAYS
turn the heater
OFF
and
remove power from the fireplace
before cleaning,
performing maintenance, or moving this fireplace. Failure to do so could result in
electric
shock, fire, or personal injury
.
Electrical and Moving Parts:
•
The fan motors are lubricated at the factory and will not require lubrication.
•
Electrical components are integrated in the fireplace and are not serviceable by the consumer.
Storage:
•
Store heater in a clean dry place when not in use.
Summary of Contents for RS-2621
Page 22: ...22 ...
