8
INSTALLATION
4.
Install the fireplace in the framed opening with a
minimum 1-1/4" (32mm) drywall screws to secure
the unit.
5.
Mask the exposed fire unit during the drywall
process.
Install drywall to the drywall stops on the
perimeter of the fire box. For more information on
the drywall stops see page 4.
6. Install log set and glacier crystals, see page 10.
7. Install the remaining side glass and front glass
according to installation diagram on Page 11.
1. Follow steps 1 & 2 from the 3 sided installation
instructions.
2. Remove the drywall stops on
both sides
of the fireplace.
3. Install the side glass then side covers on both sides of
the fireplace (
the side glass must be installed before
the metal side cover.
See installation diagram on
Page 11.)
4.
Install the fireplace in the framed opening with a
minimum 1-1/4" (32mm) drywall screws to secure the
unit.
5.
Mask the exposed fireplace during the drywall
process.
Install drywall to the drywall stops on the
perimeter of the fireplace. For more information on
the drywall stops see page 4.
6. Install log set and glacier crystals, see page 10.
7. Install the front glass according to installation
diagram on Page 11.
1. Follow steps 1 & 2 from the 3 sided installation
instructions.
2. Remove the corresponding drywall stops according
to your installation (in the example, the drywall
stops on the left end would be removed.)
3. Install the side glass then the corresponding side
cover according to your installation (
the side glass
must be installed before the metal side cover.
See installation diagram on Page 11.)
FULLY RECESSED INSTALLATION (LEFT/RIGHT CORNER)
FULLY RECESSED INSTALLATION (SINGLE SIDED)
