14
Operation
Power
Plug the power cord into a dedicated ~230 Volt 10 Amp grounded outlet (see
IMPORTANT SAFETY
INFORMATION
on
Pages 2 and 3
). Make sure the outlet is in good condition and the plug is not loose.
NEVER
exceed the maximum amperage for the circuit.
DO NOT
plug other appliances into the same
circuit.
Methods of Operation
This electric fireplace can be operated by the TOUCH ON CONTROL PANEL, located on the UPPER
right corner of the fireplace or by the battery-powered REMOTE CONTROL.
Remote control (
H
)
Touch-on Control Panel Operation
BUTTON
FUNCTION
ACTION & INDICATION
POWER
ON
: Enables control panel functions and
remote control. Turns on flame.
OFF
: Disables control panel functions and
remote control. Turns off flame.
1.
Press once:
Indicator light turns on.
Power turns on. All functions enabled.
2.
Press again
: Flame turns off. Unit goes
to standby. All functions turn off.
MEDIA
MEDIA BED button
: Turns on media bed
and changes color.
NOTE:
color effect stays on until power
button is turned off.
NOTE:
this fireplace has memory function
for ember bed.
1.
Press once:
Turns on ember bed.
2. Press again
until desired color is
reached. In total ten colors and one fade
mode.
01-02-03-04-05-06-07-08-09-10-11
Read and understand
this entire owner’s manual, including
all safety information
, before
plugging in
or
using
this product. Failure to do so could result in
electric shock, fire,
serious injury, or death.
Control Panel
Summary of Contents for SPS-100B-AU
Page 19: ...19 Spare Parts List ...
