FR-W1811
Aviator Instructions 29
My Fan Is Not Producing Enough Air Movement
If possible, please consider using a longer than included downrod.
My Remote Or Wall Control Is Not Controlling My Fan
Verify that the fan is receiving power by power cycling the fan.
To Do This:
1. Cut power to the fan via standard On/Off wall switch, or the
breaker if standard wall switch is not applicable.
2. Wait at least 10 seconds, and then restore power.
3. The fan will power on in Pairing mode for 3 minutes.
4. Press and hold
and
buttons on wall control
for 10-15 seconds.
5. When the LED indicator remains solid green, and three
(2) audible beeps are heard, the pairing process is complete.
I Don’t See My Fan’s WiFi (ModernFormFan_xxxxxx)
In My Phone’s List of Available Wifi Networks.
6. If your fan had been previously paired the Wi-Fi radio will be off.
7. To turn on Wi-Fi, press and hold fan speed up and fan speed down
buttons on your remote control or wall control for 6 seconds.
8. The fan will beep and you will see its Wi-Fi network available for
connection.
My Home Wi-Fi Network Is Not Showing Up In the
App’s List During Setup.
9. Your fan supports connection with 2.4GHz 802.11b/g/n networks.
Confirm your network is compatible by checking your router
settings or contact your router manufacturer.
10. Make sure your network’s SSID is not hidden.
11. Your fan does not support 5 GHz network connectivity connection.
