•
A so-called YPbPR is another way of connecting
the DVD to your TV set. Use a Component Video
cable that has 3x RCA plugs at each end, one for Y
(green), one for Pb (blue) and one for Pr (red). At
one end of the cable connect one Y RCA plug to
the Y (green) connector on the MODIX, one Pb RCA
plug to the Pb (blue) connector on the MODIX and
one Pr RCA plug to the Pr (red) connector on the MODIX. Take the other end of the cable and connect the
Y (green), Pb (blue) and Pr (red) plugs to the corresponding Progressive Scan inputs on the TV.
NOTE !
Progressive Scan is available and requires a special type of cable and a special TV set.
6
6
.
.
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
n
n
g
g
t
t
o
o
A
A
u
u
d
d
i
i
o
o
S
S
y
y
s
s
t
t
e
e
m
m
Conventional/analogue audio connections:
To hear the sound of this Player through your TV,
use the audio cables (white/red) to connect AUDIO
OUT (L/ R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV (cable
supplied).
Advanced/digital audio connection
The digital multi-channel connection provides the
best sound quality (Dolby Digital and AC3). It
requires a multi-channel A/V receiver that supports
one or more of the audio formats. Connect the
Player’s digital audio outlets (optical) to the
corresponding input on the amplifier. - Special
cables are required for this purpose. Next, change
the DVD player’s settings on the “Audio settings” menu. Refer to your amplifier’s instruction manual for
more information on correct setup.
CAUTION !
If the audio format of the Digital does not match the capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all.