EEI-3413/ EEI-4327 CHAIR/ LOVESEAT
Customer Service 609-256-9000︱www.modway.com
Page 2 of 2
STEP 1:
1. Please put
Chair Body (1)
upside down on a carpeted or padded surface.
2. Open the velcro on the bottom of the
Chair Body (1)
and take out 2 pieces of
Front Legs (2)
, 1 piece of
Left Back Leg (3)
, 1 piece of
Right Back Leg (4)
and hardware package.
3. Attach 2 pieces of
Front Legs
(2)
to the front of
Chair Body (1)
by using 4 pieces of
Bolts (A)
with 4 pieces
of
Spring Washers (B)
and 4 pieces of
Flat Washers (C)
as shown.
4. Attach 1 piece of
Left Back Leg
(3)
to the left back of
Chair Body (1)
by using 2 pieces of
Bolts (A)
with 2
pieces of
Spring Washers (B)
and 2 pieces of
Flat Washers (C)
as shown.
5. Attach 1 piece of
Right Back Leg
(4)
to the right back of
Chair Body (1)
by using 2 pieces of
Bolts (A)
with 2
pieces of
Spring Washers (B)
and 2 pieces of
Flat Washers (C)
as shown.
6. Use
Allen Wrench (D
) to tighten all
Bolts (A)
clockwise as shown.
Legs + Hardware package Inside
STEP 2:
Close the Velcro on the bottom of the
Chair Body (1).
Carefully turn over the assembled Chair.
Assembly is complete. Your Chair is ready to enjoy now!
