background image

Long Bolt  x40mm        x 8

Short Bolt  x20mm       x 8

 

Customer Service 908-368-1025

www.modwayfurniture.com                                                                             

Page 1 of 4 

EEI–2799/2800 

 BAR STOOL

 

Hardware:

 

Components:

 

A

 

 

1

 

Thank you for purchasing the 

MODWAY BAR STOOL! 

Before you start, here are some helpful advice: 

1

.

We suggest you spend a short time reading through this leaflet and then follow the simple step by step  

    instructions. 

2

.

Owing to the size and weight of the bar stool, we recommend that it is assembled by two adults, on a   

    carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes. 

3

.

Please do not use any tools other than those provided or recommended in these instructions. 

4

.

Please do not throw away any of the packaging or instructions until you have checked all the components and 

    hardware and the furniture is fully assembled.  

5

.

Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the  

    components from time to time, so please save the tools that have been provided. 

6

.

Please keep all pieces out of reach of children. 

C

 

Flat Washer                  x 16

 

4

 

4

 

3

 

Bar Stool Back        x1

 

2

 

Bar Stool Seat            x1

 

3

 

Bar Stool Front         x1

 

1

 

2

 

B

 

 

D

 

Allen Wrench               x 1

 

4

 

Stretcher               x2

 

5

 

5

 

 

EEI-1006 Seat Cushion (Packed separately) 

Summary of Contents for Conduit EEI-2799

Page 1: ...t is intended for Approximate assembly time 30 minutes 3 Please do not use any tools other than those provided or recommended in these instructions 4 Please do not throw away any of the packaging or instructions until you have checked all the components and hardware and the furniture is fully assembled 5 Assemble all components loosely until advised to tighten Depending on use it may be necessary ...

Page 2: ...l Seat 2 Use Allen Wrench D to tighten Long Bolts B Do not fully tighten Long Bolts B at this step Place Stretchers 4 to the assembled Bar Stool Back 1 and Bar Stool Seat 2 as shown Insert 4 pieces of Short Bolt A with 4 pieces of Flat Washer C into the holes on Bar Stool Back 1 through the holes on Stretchers 4 Use Allen Wrench D to tighten Short Bolts A Do not fully tighten Short Bolts A at this...

Page 3: ... into the holes on Bar Stool Back 1 through the holes on Stretchers 4 Use Allen Wrench D to tighten all the Short Bolts A and Long Bolts B Do not fully tighten the Bolts A B at this step 3 Bx4 Cx8 Dx1 Ax4 Hardware Tool required Carefully turn over the assembled Bar Stool Please put a heavy object or seat one adult on top of the assembled Bar Stool to press the bar stool for leveling Use Allen Wren...

Page 4: ...5 www modwayfurniture com Page 4 of 4 EEI 2799 2800 BAR STOOL Carefully put Seat Cushion 5 to Bar Stool Seat 2 Fasten Seat Cushion 5 to Bar Stool Seat 2 by using the band on Seat Cushion 5 as shown STEP 5 Band on Seat Cushion 5 5 ...

Reviews: