Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 2 of 3
EEI –1039
DINING CHAIR
STEP 1:
STEP 2:
Please put the
Chair Body (1)
upside down on a carpeted or padded area.
Then open the zipper on the bottom of
Chair Body (1)
, to make the inside of the
Chair Body (1)
fully visible.
Insert the
Left Front Leg (2)
into the right bottom hole on the
Chair Body (1)
as shown.
Attach the
Left Front Leg (2)
by using 2 pieces of
Bolt (B),
2 pieces of
Spring Washer (C)
and 2 pieces of
Flat Washer (D).
Repeat the same steps for
Right Front Leg (3).
Do not fully tighten
Bolts (B)
for either leg.
Insert 1 piece of
Back Leg (4)
into the upper hole on the bottom of
Chair Body (1)
as shown.
Attach them by 2 pieces of
Bolt (A),
2 pieces of
Spring Washer (C)
and 2 piece of
Flat Washer (D
) as shown.
Repeat the same steps for the remaining
Back Leg (4).
Do not fully tighten
Bolts (A)
for either leg at this step also.
2
Bx4
Dx4
Cx4
Hardware & Tool required
1
B
C
D
Ax4
Dx4
Cx4
Hardware & Tool required
1
2
3
4
C
D
A
3
1
4
