Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 2 of 3
EEI-2276
SWING CHAIR
STEP 1:
Ax1
Bx4
Cx3
Dx2
Ex10
Fx8
Gx1
Hx1
Jx1
Kx1
Hardware & Tool required
Please put all chair parts
on a carpeted or padded area.
Find hardware package in the box packing
Base (1/2)
&
Stand (3/4)
.
Place
left Base (1)
to
Right Base (2)
as shown.
Secure the back of base by using 3 sets of
Bolts/Nuts (C)
.
Secure the front of base by using 2 sets of
Screw Set (D)
.
Use
Allen Wrench (J)
and
Open Wrench (K)
to tighten
Bolts/Nuts (C)
clockwise until secure
.
Use
Phillips Head Screw Driver (Not Provided)
to tighten
Screw Sets (D)
.
Secure 10 pieces of
Leveler (E)
into the bottom of assembled Base as shown.
STEP 5:
Insert
Spring Holder (H)
into the pre-drilled hole at the top of
Upper
Stand (4)
as shown.
Hang the assembled
Basket Frame (5/6/7)
to
Upper
Stand
(4)
by using 1 piece of
Spring (G)
as shown.
STEP 4:
Attach
Upper Basket Frame (6)
to
Lower Basket Frame (5)
as shown.
Secure by using 4 sets of
Screw Set (F) .
Use
Phillips Head Screw Driver (Not provided)
to tighten
Screw Set (F)
clockwise until secure
.
Place
Cushion (7)
to the assembled
Basket Frame (5/6)
.
STEP 3:
Insert
Upper Stand (4)
into
Lower Stand (3)
as shown.
Secure by using 1 set of
Bolt/Nut (A) .
Use
Allen Wrench (J)
and
Open Wrench (K)
to tighten
Bolt/Nut (A)
clockwise until secure
.
STEP 2:
Attach
Lower Stand (3)
to the assembled Base as shown.
Secure the back of base by using 4 sets of
Bolts/Nuts (B)
.
Use
Allen Wrench (J)
and
Open Wrench (K)
to tighten
Bolts/Nuts (B)
clockwise until secure
.
Basket frame (5/6).
&
Summary of Contents for EEI-2276
Page 3: ......
