EEI-2547
A×4
B×4 C×4
STEP1:
STEP2:
A×4
B×4 C×4
Legs Package
+
Hardware Package
Please open the Velcro on the bottom of Chair Seat
(2).
Insert 1 piece of Front Leg
(3) into the bottom of Chair Seat
(2) as shown.
Attach by 2 pieces of
Bolt (A)
, 2 pieces of
Spring Washer (B)
, and 2 pieces of
Flat Washer (C)
as
shown.
Repeat the same steps for another Front Leg
(3).
Do not fully tighten Bolts
(A) for either leg.
Please put Chair Back (1) upside down on a carpeted or padded area.
Then attach
Chair Seat (2)
to
Chair Back (1)
by using 2 pieces of
Bolt (A)
, 2 pieces of
Spring
Washer (B)
, and 2 pieces of
Flat Washer (C)
for each corner as shown.
Do not fully tighten all Bolts
(A).
D×1
D×1
