EEI-2611/2612
LEFT/RIGHT BUMPER CHAISE
STEP 1:
Please put the
Bumper Chaise Frame (1)
without
Seat Cushion (2)
,
Back Cushion (3)
and
Side Cushion (4&5)
upside down on a carpeted or padded area by two adults to make fully visible the round metal plate on each corner
and middle.Open the Zipper on the bottom of
Bumper Chaise Frame (1)
as shown, take out the packages of
5 pieces
Leg (6)
, then close the Zipper on the bottom of
Bumper Chaise Frame (1)
.
Take off the Black Protection Cover on the 5 piece
Leg (6)
.
Insert 1 piece of
Leg (6)
labeled "Middle Leg" into the middle hole on the round metal plate at the middle of
Bumper Chaise (1)
. Insert 1 piece of
Leg (6)
into the hole on the round metal plate at the corners of the
Bumper Chaise (1)
. Repeat the same steps for the remaining
Legs (6)
.
X5 PCS
STEP 2:
Carefully turn over the
Bumper Chaise Frame (1)
. Put
Seat Cushion (2)
,
Back Cushion (3)
and
Side Cushion (4&5)
to the assembled
Bumper Chaise
as shown.
Assembly is complete.The Bumper Chaise is ready to enjoy now!
Customer Service 908-368-1025 I www.modwayfurniture.com
Page 2 of 2
Black Protection Cover
x 5PCS
Legs inside
