EEI-2678/2679
TV STAND
STEP 7:
Cx6
Dx6
Ex1
Hardware & Tool required
STEP 8:
1
Position the other piece of
Bottom Panel (3)
to the assembled
Top Panel (1)
,
Side Panels (2)
,
Bottom Panel (3)
,
and
Center Panel (4)
as shown.
Please confirm the assembled
Double-ended Bolts (A)
and
Dowel (B)
have been inserted into the pre-drilled holes on the
other piece of
Bottom Panel (3)
fully.
Insert 6 pieces of
Nut (C)
with 6 pieces of
Flat Washer (D)
into the assembled
Double-ended Bolts (A)
as shown.
Use
Box Wrench (E)
to tighten all the
Nuts (C)
clockwise until secure.
Position 1 piece of
Legs (5)
to the assembled
Top Panel (1)
,
Side Panels (2)
,
and
Bottom Panel (3)
as shown.
Insert 2 pieces of
Long Bolts (F)
with 2 pieces of
Flat Washer (D)
into the pre-drilled holes in the
Bottom Panel (3)
through the holes In the
Leg (5)
.
Use
Allen Wrench (H)
to tighten
Long
Bolts (F)
clockwise until secure.
Repeat the same steps for the other piece of
Leg (5)
.
2
2
2
3
3
D
C
E
2
3
4
2
2
1
Tear off the sticker on the 4 pieces of
Mats (J)
.
Carefully attach 4 pieces of
Mat (J)
to
Legs (5)
as shown.
2
2
2
3
3
D
F
E
1
2
2
2
4
5
5
5
5
J
5
5
3
3
Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 5 of 6
Hardware & Tool required
Dx4
Fx4
Hx1
Jx4
